Funda Toyota adecuada, funda para espejo retrovisor con diseño de fibra de carbono ABS para Corolla 2019+

Product Introduction Suitable for Toyota Corolla 2019 rearview mirror cover, 2019-2023 Levin rearview mirror decorative cover COROLLA Quantity: 2 pieces Material: ABS Color: Chrome-plated glossy finish, carbon fiber pattern Attention!! If you need an invoice, please contact customer service in advance, thank you! Installation Instructions 1. Simulated installation Compare and adjust the product to the exact position where it is to be installed on the car. 2. Surface treatment 1. Clean Clean the area where installation is required with a towel dampened with alcohol or clean the car body with water. 2 Precautions Before installation, the vehicle body must be kept dry and free of dust, oil, and wax. When the temperature is below 10 degrees, be sure to heat the double-sided tape on both the vehicle body and the product. 3. Use of thickening agents Use a cotton swab or paper towel to lightly wipe the area of the car body where the adhesive is to be applied 4. Installation First, peel off a corner of the protective film on the back of the product, leaving the film on the outside. Align the product with the installation location, then slowly peel off the film and press it down. 5. Safe period The glued area cannot be exposed to water, oil, or large amounts of dust within 48 hours after product installation. Note: Please compare before installation. Once the red adhesive film on the back is removed, returns and exchanges are not accepted