Balón de baloncesto G7X original para adultos y estudiantes, para competición en interiores y exteriores, resistente, número 7, buen agarre, 12 piezas suaves.

[Friendly Reminder] 1. Proper Inflation: Use a special air needle and lubricate it before slowly inserting it into the air valve for inflation. Do not use a high-pressure air pump for direct inflation. The inflation pressure of the ball should be between 7-9 PSI.Testing method: On a flat, hard surface, the basketball is dropped freely from a height of 1.8m, and the rebound height should be between 1.2 and 1.4m to be considered normal. 2. Do not over-inflate the ball, especially in summer; do not kick the basketball with your feet or sit on it to rest; do not hit the basketball forcefully to prevent it from deforming or bulging. 3. When a new ball is used on an outdoor court, it will be a bit slippery due to the dust, but it will feel better after a period of breaking in.After use, the surface of the ball should be cleaned. You can wipe it with a damp towel, but do not wash it with water. Store it in a cool, dry place so that it will still be sticky for the next time you play. 4. Do not play ball on rainy days or when there is water on the field. If the ball gets wet, wipe it dry with a towel and then place it in a ventilated and dry place. Do not expose it to direct sunlight.The purpose of not soaking in water is to prevent the ball from coming unglued. 5. Be careful to remove sharp objects from the area and surrounding areas to avoid puncturing or stabbing the ball and causing injury during exercise. 6. If the ball is not used for a long time, it should be partially deflated (leaving about 70-80% of the air) and stored in a cool, dry place. Do not completely deflate the ball and flatten it for storage, as this can easily cause the ball's outer layer to come unglued. 7. In case the ball's surface becomes partially unglued, you can use shoe repair glue or other soft glue to fix it, or you can go to a shoe repair shop to have it fixed. Do not use hard glues like 502, remember this.Because 502 is a hard glue, using it on the ball surface not only results in poor adhesion, but also causes the ball surface to become locally stiff, affecting the feel of the ball. 8. If the air valve leaks, do not throw the ball away easily, as the air valve on most basketballs is replaceable.