Arrancador 4 en 1 EAFC con compresor de aire, batería portátil de 1200 A, para coches, arrancador de batería, inflador de neumáticos

1.The product has just been purchased, you need to charge the flashlight first, then insert the product for more than 4 hours before starting the car because the product's battery is empty.This operation can extend the lifespan of the product! 2. Do not charge and load at the same time! 3.Charge every 3 months, low power consumption starts. 4. Only charge the phone tablet properly. Efficiency is approx.50 %. 5.The charging speed or discharging speed will be fast during the last 30% of the jump starter's performance. Please do not worry about these issues. This is a characteristic of high-quality lithium batteries and it will not affect product quality or normal usage. 6.The battery level drops significantly after starting the car. Starting the car consumes a lot of power. Please note the time after use. 4-in-1 Car Jump Starter 1,2000 A jump starter 2,150 PSI Air Compressor 3. Powerbank 4. LED -Torchlight The specification: Spitzenstrom: 1200 A Auto jump start output: 12 V USB output 5V/2A Gas engine rating: Up to 6.0 liters Operating temperature: -20℃-60℃ Diesel and steam dual start with strong performance Spitzenstrom 600A Supports: 3.0-liter gasoline vehicles Spitzenstrom 1200A Supports: 4.0-liter gasoline vehicles and 2.0-liter diesel vehicles Spitzenstrom 2000A Supports: 6.0-liter gasoline vehicles and 4.0-liter diesel vehicles How do you start your vehicles? 1. Insert the jumper cable into the booster. 2. Connect the clamp cable to the car battery. 3.Start your car engine. 4.Remove brackets and remove. How to inflate tires? 1.Remove the hose from the jump starter box. 2. Press the power button and then press the toggle button to switch the inflation modes. 3.Preferred the print.Choose one unit. 4. Press the power button to start pumping.